To obtain access to full text of journal and articles you must register!
- Article name
- DEFORMABILITY OF NANOCOMPOSITE EPOXY RESIN - MULTI-WALLED CARBON NANOTUBES DURING REPEATED COMPRESSION TEST
- Authors
- Shebanov S. M., , shebanov_s@mail.ru, D. Mendeleyev University of Chemical Technology of Russia, Moscow
Gaevoi N. V., , , Ltd POLYPLASTIC, Moscow, Russia
- Keywords
- multi walled carbon nanotube / epoxy resin / nanocomposit / deformation / multicyclic compression
- Year
- 2010 Issue 3 Pages 104 - 110
- Code EDN
- Code DOI
- Abstract
- In this article the repeated compression test results in non-linear deformation region of nanocomposite (Nanocomposite LTD) specimen based on epoxy resin DER-330 (Dow Chemical) reinforced multi-walled carbon nanotubes (MWCNT) are presented. The curing agent used was triethylenetetramine (Dow Chemical). The MWCNT manufacture technology and technology of adding them in epoxy resin are developed in the Ltd Nanocomposite. It has been demonstrated that deformation set of NC specimen after repeated compression test up to 90 and 120 MPa is not above 0,25 %. Control specimen of epoxy resin had nonreversible deformation 11 % with maximum load 105 MPa.
- Text
- To obtain access to full text of journal and articles you must register!
- Buy
